Provide® Abutment Selection

Material:
 Titanium Alloy

Indications:
• Single- and Multi-Unit Porcelain Fused to Metal Restorations
• Maximum Angulation Correction of 10°
• Minimum Interarch Space of 6mm

1.  Select the proper abutment collar height by measuring the height of the healing abutment above the tissue on the buccal, not including the dome portion. Subtract this measurement from the total height of the healing abutment, then subtract an additional 1mm. The resulting abutment collar height will place the crown margin 1mm subgingival on the buccal. Next, select the proper post height that will allow approximately 2mm of interarch distance space between the top of the post and the opposing occlusion. Finally, match the color of the implant platform to determine the platform diameter.

2. Remove the healing abutment using a .048" Large Hex Driver. To help prevent accidental swallowing, thread floss through the spinner on the driver.

3. Activate the fingers on the Provide Abutment using the QuickSeat® Activator Tool.

(continued on next page)