Screw Retained Multi-Unit Provisional
PreFormance® Temporary Cylinder
Indirect Technique

Material:
 PEEK; titanium alloy connection

Indications:
• Screw Retained Multi-Unit Provisional Restorations
• Minimum Interarch Space of 4mm
• Minimum Tissue Height of 2mm
• Maximum Divergence of 40º Between Implants

1. Restorative Dentist
 Follow the steps for Implant Level Impressions on pages 11-13 for the Pick-Up Technique and pages 14-16 for the Twist Lock™ Transfer Technique.

2. Laboratory
 Set denture teeth on the cast where the multi-unit bridge will be fabricated.

3.  Make a vacuum formed template over the denture teeth and adjacent teeth. Remove the template, denture teeth and wax from the cast.

4.  Select and place the proper diameter Non-Hexed PreFormance Temporary Cylinders onto the implant analogs. Thread waxing screws into the analogs until finger tight using a .048” Large Hex Driver

(continued on next page)