Implant Retained Fixed Prosthesis
UCLA Abutment
Fixed Hybrid
(continued from previous page)

5. Restorative Dentist
 Place the wax try-in into the mouth. Verify the occlusion, aesthetics and phonetics. Make any adjustments necessary. If major adjustments are necessary, make a new interocclusal record and return to the laboratory for a new set up and try-in.

6. Laboratory
 Make a plaster or silicone matrix of the verified wax try-in and remove the denture teeth inside it.

or

Request a CAM StructSURE™ Precision Milled Bar. See CAM StructSURE Manual (ART861)

7.  Carefully remove the UCLA Abutments from the verification index. Place the Non-Hexed UCLA Abutments onto the implant analogs and thread try-in or waxing screws into the analogs until finger tight using a .048” Large Hex Driver. Adjust the height of the plastic sleeves as necessary. Wax the hybrid bar patterns to the wax sleeves and add acrylic resin retention on the top. Use the matrix on the cast to position the bar within the confines of the wax try-in.

8.  Remove the hybrid bar wax-up from the cast. Invest, burnout and cast the hybrid bar in a semi-precious or high noble alloy (see page 9 for casting alloy specifications). Divest, finish and polish the under surface of the bar with polishing protectors in place. Return the bar to the restorative dentist for try in and fit verification.

(continued on next page)